Open-plan administration office with white workstations and light-blue screens overlooking clinic buildings in Dubai Healthcare City Craftsman inspecting a walnut boardroom table top while colleagues assemble executive desks Clinic reception and waiting area with a white reception counter and upholstered waiting chairs
Factory-direct office and clinic furniture

Office and Clinic Furniture in Dubai Healthcare City

We design, manufacture and install furniture for hospitals, clinics and healthcare companies in Dubai Healthcare City from our own factory in Al Quoz, about 15 to 20 minutes away. Reception counters, waiting seating, consultation desks, administration workstations, training tables and storage for DHCC Phase 1 in Oud Metha and Phase 2 in Al Jaddaf, in easy-clean finishes, built to your floor plan and installed by our own team.

  • Own factory, made to order
  • Receptions, waiting areas and offices
  • Easy-clean finishes and clean installation
  • Trade pricing for B2B, retail for all
{{ slideCaption }}
  • ≈ 15–20 minFrom our Al Quoz factoryAbout 15 km via Sheikh Zayed Road
  • 7,000 sq ftFactory in Al QuozCutting, edging, veneering and assembly
  • Made to fitClinics, hospitals, officesSized for your rooms and your lift
  • B2B + retailTrade and retail ordersFrom one counter to full buildings
Operator running a panel saw while the team assembles white workstation frames with light-blue screens
Built in our factory, installed in Dubai Healthcare City
01 / Manufacturer, not a reseller

Clinic and Office Furniture for DHCC, Built in Our Own Factory

Dubai Healthcare City is the city’s free zone for healthcare, with hospitals, specialist clinics, dental and day-surgery centres, laboratories, pharmaceutical companies and medical education in Phase 1 in Oud Metha, and wellness providers in Phase 2 on the creek at Al Jaddaf. Every one of them has a front of house that patients judge in seconds and a back office that runs all day. We make the furniture for both: reception counters, waiting seating, consultation desks, administration workstations, meeting and training tables and storage. We furnish receptions, waiting areas, consultation rooms and offices; clinical and medical equipment stays with your specialist suppliers. Our factory in Al Quoz cuts, edges, veneers and assembles every piece, and you deal directly with the people who design, make, deliver and install it.

Production runs on computer-controlled panel saws, edge-banding and drilling machines, so a run of matching consultation rooms or a full administration floor comes out consistent in size, colour and finish. Our team of designers, machine operators, carpenters, finishers, drivers and installers handles a hospital administration block as easily as a single clinic reception.

What we manufacture

  • Reception counters and nurses’ stations
  • Waiting-area seating and tables
  • Consultation desks and storage
  • Administration workstations
  • Meeting, training and lecture tables
  • Lockable record and file cabinets

Who we make it for

  • Hospitals and their administration
  • Specialist and multi-speciality clinics
  • Dental and day-surgery centres
  • Pharmaceutical and laboratory companies
  • Medical education and wellness providers
  • Healthcare fit-out contractors and designers
02 / Getting to Dubai Healthcare City

How Far Is Our Factory From Dubai Healthcare City?

Dubai Healthcare City has two parts. Phase 1, in Oud Metha next to Umm Hurair and Al Karama, is the established cluster of hospitals, clinics, medical office buildings and medical education. Phase 2, at Al Jaddaf overlooking Dubai Creek, is focused on wellness. Our factory in Al Quoz is about 15 km from both, around 15 to 20 minutes outside rush hour. We plan every delivery around patients, the free zone’s access rules and the hours your building allows.

Dubai Healthcare City delivery guide: what to expect, and how we plan it
Type of buildingWhat to expectHow we plan it
Medical office buildingsClinics on every floor, patients in lifts and corridorsService lift booked out of clinic hours, protected route, quiet work
HospitalsStrict security, infection control and 24-hour operationWorks agreed with facilities, wrapped furniture, clean installation
Dental and day-surgery centresHygiene rules and treatment rooms next to receptionAfter-hours installation, rooms wiped down and left as found
Pharmaceutical and lab officesControlled areas and secure document storageAccess agreed per room, lockable storage fitted first
Medical education buildingsStudents, lecture timetables and term datesHoliday or weekend installation, rooms ready for the next lecture
Wellness centres in Phase 2Guests on site and a calm, premium settingDelivery through the service entrance before opening, no clutter left

Oud Metha Road and the roads around Al Garhoud Bridge are busiest at rush hour and school times, roughly 7 to 9 am, 1 to 3 pm and 5 to 8 pm. Clinics are busiest in the late afternoon and evening, so we prefer early-morning or late-night slots and book the service lift first.

Which road we take, and when

From the Al Quoz factory we take Sheikh Zayed Road towards the Trade Centre and Oud Metha Road into Phase 1, or Al Khail Road to Al Jaddaf for Phase 2. Large orders arrive as full loads in the agreed slot, and we split very large projects into several runs so lifts and corridors are never blocked for long.

03 / Projects

Recent Furniture Projects in Dubai Healthcare City

A selection of spaces we have furnished in Dubai Healthcare City, from a single consultation office to a hospital administration floor. We keep our clients and their buildings confidential, so each project is described by its type of building. References for similar projects are available on request.

Specialist clinic reception and waiting area with a white counter and upholstered chairs
DHCC Phase 1 · medical office building

Reception for a specialist clinic

A white reception counter with storage behind for patient files and upholstered waiting chairs in wipe-clean fabric, installed overnight so the clinic opened as normal.

About 15 km from our factoryAbout 18 min
Doctor consultation office with a desk, two patient chairs and wall storage
DHCC Phase 1 · clinic

Consultation offices for a clinic

Consultation desks with two patient chairs and wall storage, repeated across a row of rooms in one easy-clean finish so every doctor works the same way.

About 15 km from our factoryAbout 18 min
Hospital administration office with workstation clusters and filing cabinets
DHCC Phase 1 · hospital

Administration office for a hospital

Workstation clusters for billing, insurance and medical records teams, with lockable filing, delivered through the service corridor with the furniture wrapped to the door.

About 15 km from our factoryAbout 18 min
Medical education training room with rows of desks, chairs and a wall screen
DHCC Phase 1 · medical education

Training room for medical education

Rows of training desks with power for laptops, chairs for long sessions and a wall screen, installed between terms so lectures were not disturbed.

About 15 km from our factoryAbout 18 min
Pharmaceutical company regional office with workstations and a glass meeting room
DHCC Phase 1 · office building

Regional office for a pharmaceutical company

Workstations for regulatory, medical and sales teams, a glass meeting room and lockable storage for controlled documents, delivered floor by floor.

About 15 km from our factoryAbout 18 min
Wellness centre reception lounge with sofas, a counter and a view over Dubai Creek
DHCC Phase 2 · wellness centre

Reception lounge for a wellness centre

A reception counter and lounge seating for guests facing the creek, in warm finishes that feel more like a hotel than a clinic, installed before opening time.

About 15 km from our factoryAbout 18 min
04 / The range

Furniture Categories for DHCC Clinics and Offices

Buy furniture for Dubai Healthcare City straight from the range, or have it made to your sizes and finishes in our factory: consultation and executive desks, administration workstations, meeting and training tables, reception counters, ergonomic chairs and height-adjustable desks, all delivered and installed anywhere in DHCC Phase 1 and Phase 2.

Also made to order in our factory
  • Clinic reception counters
  • Nurses’ station counters
  • Waiting-area benches and tables
  • Consultation desks with wall storage
  • Medical-records cabinets
  • Lecture and training tables
  • Staff-room and locker furniture
  • Desks with built-in power sockets
05 / A selection

Desks, Workstations and Chairs to Shortlist

Open any product for its details, add it to your quote list, and ask us about made-to-measure versions in your own sizes and easy-clean finishes.

{{ p.imgAlt }}
{{ p.categoryName }}
{{ p.name }}
AEDAED {{ p.priceAmount }}+ VAT
View details
06 / Custom design & manufacturing

Custom Clinic Furniture and Space Planning for DHCC

A clinic in Dubai Healthcare City has to feel calm and trustworthy from the door, keep patients flowing from reception to waiting to consultation, and stay easy to clean. Standard office furniture rarely fits clinic rooms or reception walls exactly. Because we manufacture, we make counters, desks, seating layouts and storage to each room and carry one finish from the front desk to the last consultation room.

Sizes to the millimetre

Counters, desks and storage cut to your walls, columns and room sizes.

Easy-clean finishes

Smooth, sealed surfaces and wipe-clean upholstery that stand up to daily disinfection.

Frames and legs

Powder-coated metal frames that are easy to clean around and do not trap dust.

Accessible counters

Reception counters with a lower section for wheelchair users and seated patients.

Power and cables

Hidden cable routes for reception and consultation computers, printers and phones.

Branded pieces

Reception counters and feature walls with space for your clinic’s logo.

Interior designer and client reviewing a 3D office layout with floor plans and material samples
Space planning before production

Space planning and complete furnishing

Send us your floor plan, the number of consultation rooms and how patients move through the clinic, and our design team turns it into a furniture layout for every non-clinical space: reception, waiting areas, consultation offices, nurses’ stations, administration, meeting and training rooms and staff rooms. We prepare 3D views of the key areas and a material board so you can approve the look before anything is cut. Everything is then made, delivered and installed under one quotation, whether we work alongside your healthcare fit-out contractor or supply the complete furniture package ourselves.

  • Layout planned around patient flow
  • Waiting areas sized to your appointments
  • One finish from reception to back office
  • Material board with easy-clean options
  • Sample before a large run
  • Packages for healthcare fit-outs
Send your floor plan
07 / Build quality

Built for Daily Use in Healthcare

Furniture in a DHCC clinic or hospital is cleaned every day, used by staff on long shifts and leaned on by patients and visitors from morning to night. Because we make it ourselves, we choose what goes into it. This is what you get.

Worktops, boards and finishes

Desk and counter tops in 18 mm and 25 mm board with smooth, sealed melamine or solid-surface finishes, chosen to stand up to cleaning products. Long counters get thicker tops and extra support.

Edges and joints

Edges are sealed with hard-wearing edge-banding matched to the top, so moisture and cleaning fluids cannot get into the board. Corners can be rounded where patients and children pass.

Frames and metalwork

Steel frames and legs with a powder-coated finish that resists chips and is easy to wipe down. Adjustable levelling feet keep counters and desks steady on any floor.

Chairs and seating

Ergonomic task chairs for long shifts, consultation and visitor chairs, and waiting seating in wipe-clean upholstery. Try them at our Al Quoz showroom before you choose.

Secure storage and hardware

Drawers run on metal runners, doors close on quality hinges, and pedestals and cabinets lock, so patient files and confidential records stay secure.

Checked before it leaves

Every piece is assembled or test-fitted in the factory and checked for finish, level and fittings before it is packed, so installation in your clinic is quick and clean.

08 / Local knowledge

Choosing Furniture for a DHCC Clinic or Office

Dubai Healthcare City brings together hospitals, specialist clinics, dental and day-surgery centres, laboratories, pharmaceutical and medical-device companies, medical education and, in Phase 2, wellness providers. Each has its own mix of front-of-house and back-office space, but all of them need furniture that is easy to clean, comfortable for patients and practical for staff.

Hospitals

Hospitals need administration floors for billing, insurance and records, nurses’ station counters, family waiting areas and meeting rooms for clinical teams.

Specialist clinics

Clinics need a welcoming reception, a waiting area sized to their appointments and consultation desks with patient chairs and storage in every room.

Dental and day-surgery centres

Dental and day-surgery centres need compact receptions, comfortable waiting seating and administration desks, all with smooth surfaces that are quick to clean between patients.

Pharmaceutical and lab companies

Pharma, laboratory and medical-device companies need workstations for regulatory, medical and sales teams, meeting rooms and lockable storage for controlled documents.

Medical education

Medical schools and training providers need lecture and training tables with power, comfortable chairs for long sessions and faculty offices.

Wellness centres in Phase 2

Wellness providers on the creek want receptions and lounges that feel like a hotel, with warm finishes, soft seating and discreet storage.

Planning numbers we start from

Rules of thumb for a first layout. We refine them against your actual floor plan.

  • Reception counters of about 1,050 to 1,100 mm high, with a lower section of about 750 mm
  • Consultation desks of about 1,400 to 1,600 mm wide with two patient chairs
  • Roughly 1.5 to 2 m² per seat in waiting areas
  • Roughly 7 to 10 m² of floor per person in administration offices
  • Clear routes of about 1,500 mm or more where wheelchairs pass
  • Service-lift doors measured before long counters are designed
09 / Delivery & installation

Delivery and Installation in Dubai Healthcare City

In Dubai Healthcare City your furniture arrives in buildings full of patients. Lifts and corridors are shared, hygiene rules apply, hospitals run around the clock and most clinics cannot close for a fit-out. Our own team plans each delivery around all of it, so your opening date holds and your patients barely notice.

Access approvals

We arrange what your building and the free zone ask for, typically the vehicle and driver details, a list of the workers on site with their IDs, our trade licence and the delivery date and time, and agree the slot with you before the day.

Clean, protected installation

Furniture stays wrapped until it reaches the room, lifts, floors and door frames are protected, and each room is wiped down and left as we found it. Packaging is taken away when we leave.

Night and weekend installation

We install at night, early in the morning or at the weekend when your building allows it, so clinics open as normal and patients are not disturbed.

Phased and multi-floor projects

For hospitals and larger clinics we build in batches and deliver floor by floor or wing by wing. Every carton is labelled by floor and room, so each piece goes straight to its place.

After you open

If a drawer needs adjusting or you add a consultation room later, message us and we arrange a visit out of clinic hours. Warranty terms depend on the product and are set out in your quotation.

10 / Why us

Why DHCC Clinics and Companies Buy Direct From Our Factory

One team designs, builds, delivers and installs your furniture, from our own factory in Al Quoz, a short drive from both phases of DHCC. That is what keeps prices fair, finishes consistent and openings on time.

Factory-direct prices

No importer or trading margin on the furniture we make, so your budget goes into the furniture itself.

Easy-clean by design

Sealed edges, smooth tops and wipe-clean upholstery chosen for daily cleaning.

Planned around patients

Layouts that move patients smoothly from the door to the consultation room.

Clean, quiet installation

Out-of-hours work, wrapped furniture and rooms left as we found them.

Our own installers

The team that builds the furniture assembles and installs it, including at night and at weekends.

B2B and retail

Trade pricing and volume discounts for clinics, hospitals and contractors; fair retail prices for everyone else.

11 / Quotes

How to Get a Quote for Your DHCC Clinic or Office

Four steps from your first message to furniture in place. No online payment is needed, and every price is confirmed in writing before you order.

  1. 01

    Send your requirements

    Share your product list or floor plan, your building in DHCC Phase 1 or Phase 2, your clinic hours and your opening date.

  2. 02

    Layout and finishes

    We suggest a layout, products, easy-clean finishes and custom sizes. Visit our Al Quoz showroom to see them.

  3. 03

    Itemised quotation

    Check specifications, VAT, delivery, installation, lead time and warranty line by line before you confirm.

  4. 04

    Made, delivered, installed

    We build or prepare the order, arrange access, then deliver and install out of clinic hours on the agreed date.

12 / Questions

Furniture in Dubai Healthcare City: Frequently Asked Questions

Something else? Message us on WhatsApp or call +971 58 542 3488.

Clinic reception with a white counter and waiting chairs in Dubai Healthcare City

How far is your factory from Dubai Healthcare City?

Our factory is in Al Quoz, about 15 km from Dubai Healthcare City, around 15 to 20 minutes outside rush hour to either Phase 1 or Phase 2. We plan each delivery around your clinic hours and the window your building allows.

Where can I buy clinic and office furniture in DHCC?

You can buy directly from our factory. Message us on WhatsApp with your list, add products to a quote from our online catalogue, or visit our Al Quoz showroom. We then deliver and install the furniture at your clinic or office in Dubai Healthcare City.

What clinic furniture do you make?

We make the furniture for the non-clinical spaces of a clinic or hospital: reception counters, nurses’ station counters, waiting seating, consultation desks with patient chairs, administration workstations, meeting and training tables and record storage. Medical and clinical equipment stays with your specialist suppliers.

Can you install at night or at the weekend?

Yes. We install at night, early in the morning or at the weekend when your building allows it. Any extra charge is shown in your quotation before you order.

Are your finishes easy to clean?

Yes. For clinics we use smooth, sealed tops with edges sealed against moisture, powder-coated frames and wipe-clean upholstery, and we can round corners where patients and children pass. We confirm the finishes for each piece in your quotation.

Do you deliver to DHCC Phase 2 in Al Jaddaf?

Yes. We deliver and install in both Phase 1 in Oud Metha and Phase 2 in Al Jaddaf, including wellness centres, where we make receptions and lounges with warmer, hotel-style finishes.

Can you make furniture to our sizes and finishes?

Yes. We manufacture in our own factory, so we can make counters, desks, tables and storage to your measurements, in the finish and frame colour you choose. We confirm what is possible, the price and the lead time before you order.

Do you offer space planning for clinics?

Yes. Send us your floor plan and the number of rooms, and our design team prepares a furniture layout for reception, waiting, consultation and administration areas, planned around patient flow, with a material board for finishes. We can then make, deliver and install everything under one quotation.

Do you work with healthcare fit-out contractors?

Yes. We manufacture to contractors’ and designers’ drawings and specifications for clinics and hospitals in DHCC and across Dubai, with trade pricing on project orders and deliveries scheduled to the fit-out programme.

Can you match furniture we already have?

Usually, yes. Send us photos, the sizes and, if possible, a sample of the finish, and we make new counters, desks or storage to sit alongside your existing furniture. This is useful when a clinic adds consultation rooms.

Can individual doctors and small clinics buy from you?

Yes. Besides large projects we sell single pieces at retail, from one consultation desk or ergonomic chair to a small clinic set, delivered and assembled in DHCC.

How long does an order take?

It depends on whether the items are in stock or made to order, and on the size of the order. In-stock items can be delivered sooner; custom and large orders are scheduled in production. We confirm the delivery date in your quotation, before you order.

How much does clinic furniture cost in DHCC?

It depends on the product, size, finish and quantity, and on delivery and installation. Send us your list or floor plan and we reply with an itemised quotation. Clinics, hospitals and contractors get trade pricing, with volume discounts on larger orders. Prices are quoted plus VAT.

Can I see the furniture before I buy?

Yes. Our showroom in Al Quoz has desks, workstations, chairs and finish samples on display. It is open Monday to Saturday, 9:00 AM to 6:00 PM. Message us first so the right person is free to help you.

What warranty is included?

Warranty terms depend on the product. We confirm the cover, what it excludes and how to make a claim in your quotation, before you buy.

Ready to Furnish Your DHCC Clinic or Office?

Send us your floor plan or product list on WhatsApp, or visit our Al Quoz showroom. We prepare an itemised quotation for design, manufacturing, delivery and installation at your clinic or office in Dubai Healthcare City.

Factory & showroomAl Quoz, Dubai, UAE
OfficeJebel Ali Industrial Area, Dubai, UAE
Phone & WhatsApp+971 58 542 3488
HoursMon – Sat: 9:00 AM – 6:00 PM · Sunday: Closed